Precautions for use: When the headset is almost exhausted, there will be 5 short beeps every 20 seconds.
One for two
Step 1: First pair the first Samsung phone with Bluetooth
1. When the Bluetooth headset is turned off, press and hold the smart switch for about 10 seconds (or directly dial the ON / OFF button to the ON state), until the headset indicator light flashes alternately red and blue, and enter the searched state
2. Turn on the Bluetooth function of mobile phone 1, search for the Bluetooth device to find the "device" name of the Bluetooth headset, and click pair to complete the connection
Step 2: Pair your Apple phone with Bluetooth headset
1. Press and hold the smart key of the headset, turn off the Bluetooth headset until the indicator light is off, and turn off the Bluetooth of the Samsung mobile phone.
2. Turn on the Bluetooth headset again to the searched state (red and blue lights flashing state)
3. Turn on the Bluetooth function of the Apple mobile phone, search for the Bluetooth device, find the name of the "device", and click pair to complete the connection
Step 3: Connect the first mobile phone to the Bluetooth headset
1. Turn on the Bluetooth function of the Samsung mobile phone and find the "Q8" that was connected before, click Connect
You can complete the intelligent one for two.
Charge
First of all, we must choose a suitable charger. Generally, Bluetooth headsets have special chargers. If there is no special charger, you can directly find the charging interface (some are fine-mouthed round holes, some are MiniUSB universal interfaces), and the rated output power is the same.
Secondly, the charging time of general Bluetooth headsets should be kept within 2 hours, because too long charging time will directly cause the machine circuit board to age or even burn out, and various inexplicable machine failures, such as standby Problems such as shortened time, frequent disconnection, shortened call distance, and inability to turn on the phone. So, for the sake of your Bluetooth headset, please give them a proper charging time.
Then, plug in all the plugs when charging, do not just plug in more than half, as long-term use will cause damage to the Bluetooth headset. Of course, when pulling the charging plug, the action should not be so big, so rude, and gentle, otherwise pulling the plug for a long time will cause the plug to loosen.
Then, when the Bluetooth headset is connected to a power source and charging starts, the red indicator light on the Bluetooth headset is on, indicating that charging is in progress. If the indicator light turns blue after charging, the charger can be removed.
Also, when you want to charge the Bluetooth headset again, make sure that the previous battery is used up before replenishing.
In addition, if the Bluetooth headset is plugged into the base or charging box for charging, compared with charging directly to the Bluetooth headset, the power after the charging will be more durable in use time. In addition, the charging method is the same as directly charging the Bluetooth headset, insert the charging cable into the hole of the base, and then turn on the power to charge normally.
Finally, after the charger of the Bluetooth headset is charged, remember to unplug it from the plug-in board. If it is plugged into the power supply for a long time, it will directly affect the life of the charger.
What are the types of Bluetooth headsets
The above are all the types of Bluetooth headsets and how to wear the Bluetooth headsets. Of course, the biggest advantage of Bluetooth headsets is that we can free users from the annoying wires and freely talk in various ways.